The construction of suspended and cantilevered scaffold structures can now be significantly simplified with the latest innovation from Layher Ltd.  The new aluminium FlexBeam is designed for use with surface scaffolds – both suspended and upright – and offers a range of optional benefits compared with other available systems.

“The FlexBeam provides 40% higher bending load capacity without the need for compression chord bracing compared, for example, to our well-established Lattice Beam 450,” says Sean Pike, Layher’s UK Managing Director.  “The design also enables lower construction heights to be achieved and enhances the range of locations that can benefit.” 

Central to the FlexBeam is a U-shaped section that allows the direct suspension of system decks.  Importantly, the concept can also be connected directly to Layher’s Allround scaffold system, enabling broader use of a contractor’s stock, while a long list of additional fittings extends its suitability further still.

“These range from lift-off protectors – which can be positioned anywhere along a structure’s length – to tie-rod connectors and concrete anchors,” adds Sean Pike.  “A choice of FlexBeam lengths is also available – from four to seven metres – while a spigot design also simplifies connection between individual beam sections, each of which offers a series of fixing points positioned at 100 mm centres.”

Layher believes that one of the key applications that the new design helps to simplify is the installation on curved structures such as bridges.  A timber beam option allows greater radii to be achieved eliminating the need for extensive material usage and minimising manpower time.  

“The advantages of the FlexBeam development are readily applicable to a host of suspended designs and can be further enhanced by installations calling for a cantilevered element.  Up to 2.7 metres can be achieved,” continues Sean Pike.  

“With the full benefit of our design and operational support, this latest addition to the range is set to develop the creativity and capability of our contracting customers further still, and represents a clear demonstration of Layher’s ongoing commitment to product development,” concludes Sean Pike.

Layher UK

Layher Limited, Works Road, Letchworth, Hertfordshire SG6 1WL

Company Registered Number 2142812 – Registered address: George Hay, Unit 1b, Focus 4, Fourth Avenue, Letchworth, Hertfordshire SG6 2TU

© 2017 Layher UK Ltd.

Terms and Conditions

Scaffolding should always be erected by trained and qualified operatives following approved procedures. For technical advice and design support contact Layher Technical Department on 01462 475100.